Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
View larger
Shaped sealing bar – U 3/0,2 mm – by the meter
KTKU302
New product
Shaped sealing bar, U-shaped, thickness: 0,2 mm, width: 2,7 mm, resistance: 2,45 Ohm/m, 1 unit=1 meter. It can be used interchangeably for sealing bar 3 x 0,2 mm.
More info
The application of shaped sealing bars improves the quality of the seal comparing it to the standard sealing tape.
By bending the bar the air bubbles are removed from the sealing area which influences the quality and strength of the seal.
The special shape ensures the ideal position of the tape on the jaws – it does not move as the deflection is put on flat supporting surfaces – it gives the vast advantage over the standard sealing bar and sealing wire.
The life-span of shaped sealing bar is longer than the one of standard sealing bar.
Shaped sealing bar is especially recommended with packing wet and dusty products: sauces, liquids, vegetables in brine, sugar, salt, etc.
Using the shaped sealing bar we achieve the ideal tension distribution – special profile decides to lower the strenght of the pressure of sealing bar.
Thanks to the use of shaped sealing bar there is possibility of sealing thicker foils with the shorter time of sealing which directly results in the efficiency of sealing machines.
Shaped sealing bar U-shaped:
thickness: 0,2 mm
width: 2,7 mm
resistance: 2,45 Ohm/m
1 unit=1 meter
It can be used interchangeably for sealing bar 3 x 0,2 mm.
Categories
- PTFE coated fiberglass fabric
-
PTFE coated fiberglass tapes
- Adhesive PTFE coated fiberglass tapes
- PTFE coated fiberglass tapes - without adhesive
- Two-edge adhesive PTFE tapes
- Adhesive PTFE coated fiberglass tapes
- Pure PTFE Adhesive tapes
- Nitto Tapes
- PTFE belts
- Silicone fabric
- Sealing bars
- Sealing wires
- Busch oils and filters
- Silicone sheeting
- Silicone rubber
- PTFE spray
- Technical sprays
- Nitto tapes
