Adhesive HS300 500 ml - HIGH STRENGTH ADHESIVE

ADHESIVE HS 300

HIGH STRENGTH ADHESIVE

SPRAY ADHESIVE HS 300 is a high strength adhesive, formulated without Methylene Chloride or other chlorinated solvents.

ADVANTAGES

• High strength formulation
• Longer open bond time - allows large areas to be covered before film dries
• Economical, good coverage
• Free from chlorinated solvents

APPLICATIONS

Spray Adhesive HS 300 will provide high-strength bonds in many different areas: Chipboard and Concrete, Insulation Materials, Canvas and Leather, Paper, Wood and Cork, Metal, Plastic and Rubbe

Apply an even coating to both surfaces to be bonded from 9” - 12” (25 - 30 cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure.

N.B. May affect certain plastics. Always test a small, inconspicuous area before general use. To prevent blockages, invert the can after use and spray to clear the nozzle.

TECHNICAL DATA

• Appearance: Clear, amber liquid
• Odour: Acetone
• SG @ 25°C: 0.68
• Pressure @ 25°C: 3 Bar
• Discharge rate: 1.7 g/sec
• Polymer type: Styrene Isoprene, Copolymer
• Tack time: Approximately 2-10 minutes
• Bonding time: Maximum adhesion in 12 - 24 hours
• Temperature range: Up to 50°C (dried film)
• Solubility: Soluble in some solvents, insoluble in water
• Recommended solvents: Amberklene FE10, , ME20 and L030,
• Flammability: Classified as extremely flammable under the EC Classification, Labelling and Packaging regulation (CLP) 1272/2008

STORAGE

The product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50°C, away from direct heat and naked flame.

HEALTH AND SAFETY

Health and Safety sheet available separately.

TECHNICAL SERVICE

CRC Industries UK Ltd provides a technical support service and maintains a constant programme of research and development. We are able to assist customers by specific product development to meet particular requirements.

MISREPRESENTATION ACT 1967 TRADE DESCRIPTIONS ACT 1968

The information given in this publication is based on our experience and reports from customers. There are many factors outside our control and knowledge which affect the use and performance of our products and for which reason no warranty is given, express or implied. Users should make

their own tests to determine the applicability of such information or the suitability of any products for their own particular purposes. Statements concerning the use of the products described herein are not to be construed as recommending the infringement of any patent and no liability for infringement arising out of any such use is to be assumed.

PRODUCER:

CRC Industries UK Ltd, Wylds Road, Bridgwater, Somerset, TA6 4DD, UK.

Download Technical Data Sheet in PDF :